Skip to main content

Cloning your Corporate UI with HTML DB - Part II (Re-Post)

The following is a re-post of the "Cloning your Corporate UI with HTML DB" series that I blogged about back in 2005 on the now-defunct Orablogs site. Most of the content and advise is still the same today, and has been reposted here exactly as it was on the old site.

June 8, 2005
Things look really good. The page rendered almost perfectly, it all mostly lines up, and there are only a couple of broken images. We're almost done, right?

Wrong.

There is still a lot of work to be done. Essentially, as it stands now, we have created a static Page Template that doesn't play well with the rest of HTML DB. Also, there are no navigational aids for HTML DB Studio left - they have been replaced by content from OTN. Which leads us to our next step - removing more OTN content.

Removing OTN Content
First of all, I don't need the content in the 3rd column at all on my pages (Resources For, Featured Downloads, Discussion Forums). However, I do want to retain that column and define an HTML DB Region Position there, so that I can put HTML DB dynamic content there.

To start , I copy the Body of my Page Template back into Dreamweaver, so that I can edit it in the WYSIWYG editor. I then remove all of the tables that make up the 3rd column content by simply selecting and deleting them. Finally, in the empty column that remains, I enter #REGION_POSITION_03#. This will allow me to position content in the 3rd column - such as the "Most Popular" and "Recently Added" boxes that I use on the home page of HTML DB Studio. With a little formatting and tweaking, I can right-align this content as well.

Next, I want to add a Region Position for the Application Menu. Just above the page where #BOX_BODY# appears is a table which has some static content in it. I can easily delete this content and replace it with my region position - #REGION_POSITION_02# - which will be the new home for my Menu.

Finally, I want to remove the content in the 1st column of the page (Product Centers, Technology Centers & Community). In all three sites, I use this region for a List of navigable sections. Just as I did before with the other two columns, I remove all of the content, all the while being careful not to alter the underlying table structure. In place of the content, I simply enter #REGION_POSITION_01#, which is my Region Position token.

Once all of the Region Positions are defined, we now have the page layout below:

Note that the images associated with the Menu and List Itema are broken. This is because the _base_href is set to http://www.oracle.com, and our image lives on http://htmldb.oracle.com. Since we are using a relative reference in the Menu Template, the image path resolves to http://www.oracle.com/i/orcl/orcl_breadcrumb_icon.gif - which is the wrong server.

If we look at the HTML from our template, we notice this line:

<base href="http://www.oracle.com/technology/index.html">

This line is causing all relative image, CSS & JavaScript references to use http://www.oracle.com/technology/ as the starting point, which in turn, is causing some images to not render. Removing this line will fix the HTML DB images, but will break the portion of the site which IS using www.oracle.com as a source for its images. This presents us with a Catch-22: Removing it breaks stuff, and leaving it in breaks stuff.

Since I do not have any access to make changes to www.oracle.com, and I do have access to make changes to htmldb.oracle.com, the only solution is to move all of the images, CSS files, and JavaScript libraries from www.oracle.com to a place which I can reference on htmldb.oracle.com. Only after transferring all of these files and updating the template will the site finally have no broken images.

Fixing the CSS References
 Note that the buttons "Submit an Application" and "Application Submission Guide" are not rendering properly either. This is due to the fact the we have not yet referenced the previously used Cascading Style Sheet(s) in this new Page Template. Since all we did was copy HTML from OTN, there was no reference of any CSS used in our original HTML DB Page Templates.

In order to correct this, let's load the production version of HTML DB Studio, view the source, and search for the term "css". (Hint: Using Firefox, you can simply hit the "/" key, start typing, the it will highlight any matches. Hitting F3 will tab to the next match. Pretty cool!) My search yielded three hits:

  • <link rel="stylesheet" href="/i/orcl/otn_dyn.css" type="text/css">
  • <link rel="stylesheet" href="/i/orcl/otn_new.css" type="text/css">
  • <link rel="stylesheet" href="/i/css/core.css" type="text/css">

Upon copying & pasting these three lines into the new template, the buttons (and some other minor things) were back to normal. We're getting there - we now have a solid foundation for most of our Page Body in our Template.

Next, we'll tackle the Page Header & Footer, including how to make the Tabs work.

Comments

Anonymous said…
Scott, do you have the rest of this article from your old posts?

I am in the midst of needing to build a custom theme that resembles an existing static website and would love to see how you finished things up..

Thank you,

Tony Miller
tony_becky_mikey@att.net
Webster, TX
March 17, 2009 at 12:57 PM
Scott said…
Tony,

If you look at the Blog Archive and expand April 2008, you will see links to all of the posts in this series.

Enjoy!

- Scott -
March 17, 2009 at 1:12 PM
Post a Comment

Popular posts from this blog

Custom Export to CSV

It's been a while since I've updated my blog. I've been quite busy lately, and just have not had the time that I used to. We're expecting our 1st child in just a few short weeks now, so most of my free time has been spent learning Lamaze breathing, making the weekly run to Babies R Us, and relocating my office from the larger room upstairs to the smaller one downstairs - which I do happen to like MUCH more than I had anticipated. I have everything I need within a short walk - a bathroom, beer fridge, and 52" HD TV. I only need to go upstairs to eat and sleep now, but alas, this will all change soon... Recently, I was asked if you could change the way Export to CSV in ApEx works. The short answer is, of course, no. But it's not too difficult to "roll your own" CSV export procedure. Why would you want to do this? Well, the customer's requirement was to manipulate some data when the Export link was clicked, and then export it to CSV in a forma...
76 comments
Read more

Manipulating Images with the... Database?

A recent thread on the OTN HTML DB Forum asked about how to determine the width & height of an image stored as a BLOB in an Oracle table. I mentioned in that thread that I have some code to manipulate an image stored in a BLOB column. This is particularly useful if you’re going to let users upload images, and you want to re-size them to display as a thumbnail. Thanks to Oracle interMedia , it is trivial to manipulate the width, height, and other attributes of images stored in an Oracle table. I’ve created a sample application here which demonstrates Oracle interMedia and HTML DB in action. Feel free to have a look. You can download this application from HTML DB Studio as well. Basically, this application allows you to upload images and perform an operation on the image as it is inserted into the PHOTO_CATALOG table. There are two places where some PL/SQL code is required: an After Submit process on page 2, and a procedure to display the images. Here is the PL/SQL for the After...
33 comments
Read more

Refreshing PL/SQL Regions in APEX

If you've been using APEX long enough, you've probably used a PL/SQL Region to render some sort of HTML that the APEX built-in components simply can't handle. Perhaps a complex chart or region that has a lot of custom content and/or layout. While best practices may be to use an APEX component, or if not, build a plugin, we all know that sometimes reality doesn't give us that kind of time or flexibility. While the PL/SQL Region is quite powerful, it still lacks a key feature: the ability to be refreshed by a Dynamic Action. This is true even in APEX 5. Fortunately, there's a simple workaround that only requires a small change to your code: change your procedure to a function and call it from a Classic Report region. In changing your procedure to a function, you'll likely only need to make one type of change: converting and htp.prn calls to instead populate and return a variable at the end of the function. Most, if not all of the rest of the code can rem...
5 comments
Read more